Electric Guitars 101

About the size of a cigarette pack, amazingly it can drive a 4 x 12 cabinet. (We didn't believe it either, so we tried it. And, sure enough, through the magic of technology, it was actually loud and sounded great, though the battery didn't hold out long.) It responds to the volume knob on your guitar and generates a sweet and convincing tube amp overdrive when cranked. It has its own built-in speaker. It can also be used on the input of another amp as a fuzz box.

The Rocktron RMM900 MIDI Cable transfers MIDI commands from your MIDI footcontroller (with 7-PIN MIDI Out Jack) to any MIDI-controllable gear with 7-Pin MIDI input.Carries A/C power to your footcontroller. Plug either end of the 7-Pin MIDI cable into a MIDI input jack and the other end into the output of your MIDI footcontroller. Plug your footcontroller's A/C adaptor into the receptacle on the back of your preamp, amplifier or effects unit marked "phantom power". (Pins 6 and 7 of the MIDI cable will transfer power to your footcontroller).30 foot length (900 cm)

The 2-button EPA-FSB footswitch from Epiphone is made for the Epiphone Blues Custom and So-Cal amps. It features Channel 1-2 On/Off and Reverb On/Off buttons.

Extension cable for Line 6 Floorboard. Black.

These 8.4V Nimh rechargeable batteries are suitable for use in all 9V applications and feature a nominal capacity of 200mah. A flat discharge curve and high nominal voltage ensure that your sound will always remain consistent. Recharge with the C-Tech 9V Nimh Battery Charger.

Heavy metal construction. Rubber rods fit right in the holes on the back of your POD to hold it securely. Screwmountable. Slide under the handle of your amp or mount on mic stand.

The Danelctro Honeytone N-10 Guitar Mini Amp is a little hot rod that can crank, and it has a great clean or overdriven sound. The Honeytone amp also features a real leather handle, belt clip, headphone jack, volume, tone, and overdrive controls. The Honeytone N-10 mini guitar amp is powered by 9-volt battery (included) or a Danelectro DA-1 adapter.

The Danelctro Honeytone N-10 Guitar Mini Amp is a little hot rod that can crank, and it has a great clean or overdriven sound. The Honeytone amp also features a real leather handle, belt clip, headphone jack, volume, tone, and overdrive controls. The Honeytone N-10 mini guitar amp is powered by 9-volt battery (included) or a Danelectro DA-1 adapter.

The Danelctro Honeytone N-10 Guitar Mini Amp is a little hot rod that can crank, and it has a great clean or overdriven sound. The Honeytone amp also features a real leather handle, belt clip, headphone jack, volume, tone, and overdrive controls. The Honeytone N-10 mini guitar amp is powered by 9-volt battery (included) or a Danelectro DA-1 adapter.

The Danelctro Honeytone N-10 Guitar Mini Amp is a little hot rod that can crank, and it has a great clean or overdriven sound. The Honeytone amp also features a real leather handle, belt clip, headphone jack, volume, tone, and overdrive controls. The Honeytone N-10 mini guitar amp is powered by 9-volt battery (included) or a Danelectro DA-1 adapter.

24K gold-plated, riveted 1/4" connector offers superior corrosion resistance.

CoreX2 Connectors are compatible with CoreX2 DIY kits only. CoreX2 pedalboard cabling provides wide-band, accurate sound with the finest audiophile-grade materials and construction techniques. Made for harmonic detail, low signal loss, and flat extended frequency response it is perfect for keeping your signal kickin' while it winds its way through a jungle of circuitry. Different gauge conductors are combined to provide accurate reproduction of all frequency ranges, and they are quad-balanced for the lowest possible noise.